Setting Up Your MediaBridge
Connecting the MediaBridge to an HDTV or HDTV Monitor
1. Move the HD/SD switch on the back of
the MediaBridge to the HD position.
Note:
When the switch is in the HD
position, there will be no video signal
from the composite or S-video jacks.
2. Using either component video cables or a DVI video cable,
connect the MediaBridge to the corresponding input on your
HDTV or A/V receiver (HD video is available through both
component video and DVI connections).
DMP3000
MediaBridge
DVI-HDTV?INPUT
COMPONENT?VIDEO?INPUT
HDTV or HDTV Monitor
Y
P
B
P
R
OR
Connecting the MediaBridge to a Standard-Definition TV
1. Move the HD/SD switch on the back of
the MediaBridge to the SD position.
Note:
When the switch is in the SD position,
there will be no video signal from the DVI
connector.
2. Using one of the following connections to connect the
MediaBridge to your TV:
• Component video (best quality)
• S-Video (better quality)
• Composite video (good quality)
Connect the cable from the back of the MediaBridge to the
corresponding input on your TV or A/V receiver.
DMP3000
MediaBridge
Y P
B
P
R
COMPONENT VIDEO INPUT
VIDEO INPUT
S-VIDEO INPUT
Standard-Definition TV
OR
OR
1662616C_01.indd 9
12/14/05 3:56:56 PM
