G
ETTING
S
TARTED
6
2. Plug the white and red connectors of
the stereo audio cable included into
the red and white AUDIO IN jacks
on the back of the transmitter. Make
sure you match the red connector
to the red jack and the white to the
white.
3. Plug the other end of the stereo
audio cable into the audio output or
headphone jack on your MP3 player
or other audio device.
If your audio source has stereo RCA outputs:
Connect the red and white plugs of the included
stereo (R/L) RCA jack adapter to the audio
source’s line out jacks. Then plug the 3.5mm jack
of the included stereo audio cable into the adapter,
and connect the stereo cable to the transmitter.
Setting Up the Transmitter
The 2.4GHz digital wireless transmitter works with a wide variety of
audio sources, from portable MP3 players to A/V receivers to DVD
players or gaming systems. The way you set it up depends on the kind
of output you want to use on your audio source.
To connect the transmitter to your audio source:
1. Before you start, unplug the transmitter.
4. Plug the transmitter back in.
Note:
High-output sources, such as DVD players or audio receivers/
amplifi ers, may cause distortion if used at full volume with the
transmitter. Try setting them at 1/2 or 2/3 volume.
Transmitter (back panel)
DC IN 6V
PAIR
R AUDIO IN L
