Acorp 4865PE, Manual

Page: 48 / 80

Chapter 2 4865PE BIOS Setup
2-48
Onboard FDC Controller
The choices: Enabled (default) Disbled
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and
second serial ports.
The Choices: Auto; 3F8/IRQ4; 2F8/IRQ3; 3E8/IRQ4; 2E8/
IRQ3; Disabled.
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
←→↑↓
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
2.6.3 Super IO Device
Press <Enter> on the item “Super IO Device” to
configuree the Super IO devices. The following menu ap-
pears for user’s configuration:
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
x RxD, TxD Active Hi, Lo
x IR Transaction Delay Enabled
x UR2 Duplex Mode Half
x Use IR Pins IR-Rx2Tx2
Onboard Parallel Port 378/IRQ7
Parallel Port Mode ECP
x EPP Mode Select EPP1.7
x ECP Mode Use DMA 3
PWRON After PWR-Fail Off
Game Port Address 201
MIDI Port Address 330
MIDI Port IRQ 10
UART Mode Select
This item allows you to select which Infra Red(IR) function of
the onboard I/O chip you wish to use.
The Choices: Normal(default), IrDA, ASKIR.
UR2 Duplex Mode
This item allows you to select which Infra Red(IR) function of
the onboard I/O chip you wish to use.
The Choices: Half (default), Full.