Acorp 4865PE Manual Download Page 47

Page: 47 / 80

Chapter 2 4865PE BIOS Setup

2-47

USB 2.0 Controller

If USB Controller is enabled, use this item to enable or disable
USB 2.0 controller.

The Choices: Enabled (default); Disabled

USB Keyboard Support

If USB Controller is enabled, use this item to enable or disable
the USB Keyboard Support.

The Choices: Enabled (default); Disabled

USB Mouse Support

If USB Controller is enabled, use this item to enable or disable
USB Mouse.

The Choices: Enabled (default); Disabled

AC97 Audio / Modem

Use this item to enable/disable the AC97 Audio/Modem.

The Choices: Auto(Automatically enabled); Disabled

USB Controller

If USB Controller is enabled, use this item to enable or disable
USB devicees.

The Choices: Enabled (default); Disabled

RTL 8100 LAN chip

Use this item to enable/disable the RTL 8100 LAN chip.

The Choices: Enabled; Disabled

Summary of Contents for 4865PE

















































































Search results

Summary of Contents for 4865PE

Reviews:

Related manuals for 4865PE

Brands by name

Popular brands

Acorp 4865PE, Manual

Search results

Summary of Contents for 4865PE

Reviews:

Related manuals for 4865PE

Brands by name

Popular brands