background image

Guidelines for safe operation

Do not operate this equipment if any cables are damaged.

Do not attempt to open this monitor; there are no user-

serviceable parts inside. Refer all servicing to suitably qualified 
personnel.

Switch off and unplug the equipment if you're not going to use 

it for a few days.

Installation

This equipment is for indoor use only (in a dry and dust-free 

environment).

Do not expose the equipment to sudden extremes in

temperature, direct sunlight or other heat sources.

Stand the equipment on a hard level surface, allowing enough 

space for air to circulate when in use.

Locate the equipment in such a way that it does not present a 

hazard or interfere with other equipment.

Ensure that any wires and cables are routed sensibly so that 

they cannot be snagged or tripped over. Do not tug or twist any 
wires or cables, or use them to hang or lift any of the units.

Operate the machine at a room temperature of +5°C to +35°C (

+41° to +95° Fahrenheit) and a relative humidity of 10% to 80% (
non-condensing).

Keep the plastic bags used in the packaging away from 

children and animals.

Keep the original packaging in case you need to transport the 

monitor.

Precautions in use

Do not spill liquid on the equipment. If you do, turn the 

equipment off immediately and take it to your supplier for 
assessment.

Do not 

drop the equipment or subject it to excessive bumping 

and jarring.

2

Summary of Contents for AKF50 Series











Reviews: