Acorn AC-238, Instruction Manual

Page: 5 / 12

4
INSTALLATION OF HANGER BRACKET:
INSTALLATION OF DOWNROD / HANGER BALL:
1) Remove the ‘R’ pin and Cross pin
from the downrod. Thread the
wires through the downrod,
insert the downrod into the
connector. (fig 3)
2) Loosen the two setscrews in the
downrod support. Install back
the Cross pin and secured with
the ‘R’ pin. (fig 4)
3) The ‘R’ pin must be properly
installed to prevent the Cross pin
from working loose. (fig 4)
1) To use Four Expansion Setscrew
to install the hanger bracket
firmly. (fig 1)
2) Install the ‘J’ hook onto the
concrete ceiling and fasten
firmly. Note the place of ‘J’ hook
as (fig 2)
Concrete Ceiling
fig 1
fig 2
fig 3
fig 4