7
1) Remove one screw from the
switch box, unscrew the
other three screws out 3-
4mm.
2) Install E27 lighkit: Attach
lightkit to the switch box.
Total two wires from the
switch box.
3) Connect the lightkit wires to
the switch box wires:
White to White, Blue to
Black. (fig 11)
4) Pointing
the
holes
of
lightkits to the three screws
by pushing up and twist
clockwise. (fig 12)
5) Fasten the first screw back
to the hole and tighten all
four screws firmly. (fig 12)
6) Install the bulbs. (fig 13)
220-240V/50HZ
E27-20W <max>
7) Carefully lift the lightkit
cover by pushing up to the
light fixture and twist
clockwise until it is held
tightly in place by the three
tabs. (fig 14)
INSTALLATION OF LIGHTKITS:
fig 14
fig 13
fig 12
fig 11
Summary of Contents for AC-238
Page 4: ...FAN STRUCTURE DRAWING 3...
