Acom 700S User Manual Download Page 37 | Manualshive

Page: 37 / 52

Acom 700S User Manual Download Page 37

User's Manual | ACOM 700S | 1.8-54 MHz Linear Amplifier

May 2021

S e c t i o n MENUS - SETTINGS AND OPTIONS | Page 37 of 52

5.4.

Menu USER PREFERENCES

Figure 5-5 Menu USER PREFERENCES

a)

ANTENNA TUNER/SWITCH INSTALLED

If ACOM 04AT remote automatic antenna tuner is installed, select YES. Refer to ACOM 04AT User's Manual
(available for download at

www.acom-bg.com

).

b)

AUTOMATIC MENU EXIT

When AUTOMATIC MENU EXIT is turned on, the amplifier exits the currently selected menu if no button
has been pressed for more than 5 minutes.

If AUTOMATIC MENU EXIT is turned off, the amplifier remains in the currently selected menu until the EXIT
button is pushed.

c)

AUTO OPERATE

The AUTO OPERATE user setting is described in Sections

3.3 Initial Turning On

and

4.1.c) AUTO OPERATE user

d)

CALL SIGN

If entered here, a call sign (or another text) will be included in any Fault Log file generated by the amplifier.
The call sign (or another text) will not replace ACOM 700S logo on the startup screen.

Use the SELECT button to select the character position. The ITEM button changes the characters. Finish by
moving the pointer out of the editable fields by means of the Left SELECT button.

«
...
35
36
37
38
39
...
»

Summary of Contents for 700S





















































Reviews:

No comments