background image

IMPORTANT SAFETY INSTRUCTIONS

 

1.

Please read these instructions carefully before using the product and save for later reference.

2.

Follow all warnings and instructions marked on the product.

3.

Our military devices complied to ITAR 

– FREE for import/export to US territory.

4.

All products comply to ROHS and REACH regulation.

5.

No halogen or toxic metal contains or generated toxic material in use.

6.

Cleaning  notice: the  product  with  a  damp  soft cloth.  Do  not  use  liquid  or  aerosol cleaners  as  it  may cause

permanent damage to the screen.

7.

Do not use this product near water.

8.

Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage

to the product.

9.

Slots  and  openings  in  the  cabinet  and  the  back  or  bottom  are  provided  for  ventilation;  to  ensure  reliable

operation of the product and to protect it from overheating, these openings must not be blocked or covered.

The openings should never be placed near or over a radiator or heat register, or in a built-in installation unless 

proper ventilation is provided.  

10.

This product should be operated from the type of power indicated on the marking label. If you are not sure

of the type of power available, consult your dealer or local power company.

11.

Do  not  allow  anything  to  rest  on  the  power  cord.  Do  not  locate  this  product  where  persons  will  walk  on  the

cord.

12.

If an extension cord is used with this product, make sure that the total of the ampere ratings on the

products plugged into the extension cord does not exceed the extension cord ampere rating. Also make

sure that the total of all products plugged into the wall outlet does not exceed 15 amps.

13.

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage

points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the

product.

14.

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous

voltage points or other risks and will void the warranty. Refer all servicing to qualified service personnel.

15.

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following

conditions:

-

When the power cord or plug is damaged or frayed.

-

If liquid has been spilled into the product.

-

If the product has been exposed to rain or water.

-

If the product does not operate normally when the operating instructions are followed. Adjust only those controls

that are covered by the operating instructions since improper adjustment of other controls may result in damage

and will often require extensive work by a qualified technician to restore the product to normal operation.

-

If the product has been dropped or the cabinet has been damaged.

-

If the product exhibits a distinct change in performance, indicating a need for service.

Summary of Contents for PCM8210

















Reviews: