Single port KVM over IP switch
11
¾
Make sure that the cable is wired appropriately for a standard 100BASE-TX adapter.
¾
Align the RJ-45 plug with the notch on the adapter’s connector and insert it into the
adapter’s connector.
3.3 Scenario of connecting IP-KVM switch to the Multi-port KVM Switch system
3.4 Connecting the External Reset/Power Option
Please refer to the manual of the IP-KVM 8/16/32 port external power switch option or a third
party external power option to connect those external devices to one of the serial interface on the
rear side of IP-KVM switch. By the date of printing this manual supported options are:
¾
.
Avocent.SPC1
800/1600
¾
Sentry In-Line Power Module
¾
Leaning
ePowerSwitch
¾
Peppercon
IPM-220L
