background image

IRIS 3000® DIGITAL VIDEO PHONE USER MANUAL

22

4-6-2-1.  Digital Photo Frame On/Off

Select “

Settings

” in the Main Menu 

and Press 

OK

Select “

System Settings

” in the 

Settings Menu and Press 

OK

Select “

Display

” in the 

System Settings Menu

To enable Digital Photo Frame, select 

On

”.  To disable, select “

Off

”.

4-6-2-2.  Digital Photo Frame 

Delay

4-6-2-3.  Language

See Section 

4.7 Digital Photo Frame

for more details

Select the delay you wish in between 

each Digital Photo Frame  

from 10-15-20 seconds 

NOTE:  If you are displaying large photo files 

(greater than 3 mega pixels or larger than 

600 x 800 pixels), set the delay in between 

each picture to 20 seconds. This will allow 

ample time for each photo to load.

Use the Navigation buttons to 

change the language displayed on 

the screen.  You can choose between 

English, Spanish or French, Francais, 

Español - US, Svenska, Nederlands, 

Norsk, Dansk, Haliano, Polski, Deutsch,  

Portugisisk, Español - EU, Suomia

4-6-2-4.  Upload Bandwidth 

Upload Bandwidth is the capacity at which the digital video phone can upload data over your Internet connection.  The IRIS 3000® Digital 

Video Phone comes with pre-set optimal factory settings.  If the video image you are sending is not as clear as you would like, you can 

adjust the upload bandwidth speed of your video phone.  

Select “

Settings

” in the Main Menu 

and Press 

OK

Select “

System Settings

” in the 

Settings Menu and Press 

OK

Select “

Display

” in the 

System Settings Menu

From the Display Menu, use the  

Navigation buttons to select  

Upload Bandwidth

Select appropriate  

Upload Bandwidth

” speed 128, 

256, 384 or 512 kbps

Press 

BACK 

when finished then, “

YES

” 

and Press 

OK 

to save your settings

If your upload bandwidth is less than 200 kbps, please contact your ISP about higher speed service. 

If your upload bandwidth is between 200 kbps and 365 kbps, you should select an Upload bandwidth speed of 128 kbps. 

If your upload bandwidth is between 366 kbps and 531 kbps, you should select an Upload bandwidth speed of 256 kbps. 

If your upload bandwidth is between 532 kbps and 698 kbps, you should select an Upload bandwidth speed of 384 kbps. 

If your upload bandwidth is greater than 699 kbps, you should select an Upload bandwidth speed of 512 kbps.

Note:  You cannot change your display settings while on a call.  You must make and save your selection prior to making calls.  To see the 

effects of the change, you’ll need to place a call.  The party you have called will be able to tell you if your picture is clearer.  If you set the upload 

bandwidth speed too high, it will distort the quality of picture.  To adjust, simply reset your upload bandwidth speed to the next setting down.   

Summary of Contents for IRIS 3000





























Reviews: