ACME Whack, User Manual

Page: 33 / 36

16
000-025
026-100
101-255
Lamp Control
No Function
Lamp off
Lamp on
17
000-255
Pan/Tilt time
Fast

Slow
18 000-254
255
Color time
Fast  Slow
Fast
19 000-254
255
Beam time
Fast

Slow
Fast
20 000-254
255
Gobo time
Fast

Slow
Fast
7. Troubleshooting
Following are a few common problems that may occur during operation. Here are some
suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connect power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED to see if it can be light up or not.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if they are linked properly.
2. If the DMX LED is on and no response to the channel, check the address settings and DMX
polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the
unit or the previous one.
4. Try to use another DMX controller.
5. Check to see if the DMX cables run near or run alongside to high voltage cables that may cause
damage or interference to DMX interface circuit.
32H