ACME STORM User Manual Download

Page: 27 / 76

- 26 -

5.2 Home Position Adjustment



To access the control menus, press the [MENU] button.



To access the offset menus, long-press the [ENTER] button.



Navigate the offset menus, using the [ENTER], [



UP] and [



DOWN] buttons.



To select a menu option or to confirm a selection, press the [ENTER] button.



To return to a higher level in the menu structure without making a change, press the

[MENU] button, or wait 30 seconds.

OFFSET MENU

VALUES

Pan

-128~127

Tilt

-128~127

Frequency(Hz)

1072~1327

LED. A

0~255

LED. W

0~255

LED. A1

0~255

LED. W1

0~255

……

LED. A10

0~255

LED. W10

0~255

Pan

Tilt

Select Pan, press ENTER.

Use UP/DOWN button to select a value between -128 and 127, confirm

your selection with ENTER.

To exit the offset menu, press MENU, or wait 30 seconds.

Select Tilt, press ENTER.

Use UP/DOWN button to select a value between -128 and 127, confirm

your selection with ENTER.

To exit the offset menu, press MENU, or wait 30 seconds.

Summary of Contents for STORM













































































Search results

Summary of Contents for STORM

Reviews:

Related manuals for STORM

Brands by name

Popular brands

ACME STORM, User Manual

Search results

Summary of Contents for STORM

Reviews:

Related manuals for STORM

Brands by name

Popular brands