ACME STORM User Manual Download

Page: 23 / 76

- 22 -

LED Use Hour

Temperature

Fan State

Firmware Version

RDM UID

Select RDM UID, press ENTER.

The RDM UID is displayed.

To exit the menu, press MENU, or wait 30 seconds.

Select Firmware Version, press ENTER.

The firmware version is displayed.

To exit the menu, press MENU, or wait 30 seconds.

Select Fan State, press ENTER.

The fan status is displayed.

To exit the menu, press MENU, or wait 30 seconds.

Select Temperature, press ENTER.

The device temperature is displayed.

To exit the menu, press MENU, or wait 30 seconds.

Select LED Use Hour, press ENTER.

Use UP/DOWN button to select Total LED Hour (total time) or LED On

Hour (current switch-on time), confirm your selection with ENTER.

The total time or current switch-on time is displayed.

Use UP/DOWN button to select LED Hours Reset, confirm your

selection with ENTER.

Use UP/DOWN button to set the password 050, confirm your selection

with ENTER. The LED operating hours is reset.

To exit the menu, press MENU, or wait 30 seconds.

Summary of Contents for STORM













































































Search results

Summary of Contents for STORM

Reviews:

Related manuals for STORM

Brands by name

Popular brands

ACME STORM, User Manual

Search results

Summary of Contents for STORM

Reviews:

Related manuals for STORM

Brands by name

Popular brands