ACME LITE PANEL 900 LP-900 CW BD30, User Manual

Page: 8 / 16

DMX 512 Address
To select , press the
ENTER
button to show
DMX ADDRESS
on the display. Use the
DOWN / UP buttons to adjust the address from 1 to 512 . Once the address has been selected, press
the ENTER button to setup or automatically exit menu mode without any change after 30 seconds.
To go back to the previous functions without any change press the MENU button.
Manual Mode
To select , press the
ENTER
button to show the
MANUAL MODE
on the display. Use the
DOWN / UP button to select the (dimmer) mode, press the ENTER button to confirm, then
use the DOWN / UP button to adjust the value between 0 and 255 , once select press the ENTER
button to setup or automatically exit menu mode without any change after 30 seconds. To go back
to the functions without any change press the MENU button.
Blackout Mode
To select , press the
ENTER
button to show
BLACKOUT MODE
on the display. Use the
DOWN / UP buttons to select (blackout) or (normal) mode. Once the mode has
been selected, press the ENTER button to setup or automatically exit menu mode without any
change after 30 seconds. To go back to the functions without any change press the MENU button
LED display
To select , press the ENTER button to show LED on the display. Use the DOWN / UP buttons
to select (LED on) or (LED off) mode. Once the mode has been selected, press the
ENTER button to setup or exit menu mode without any change after 30 seconds. To go back to the
functions without any change press MENU button again.
7