ACME Eventx 100, User Manual, Page: 23 / 32

With this function, users are able to display the running time of the device.
Fixture use time selected:
- Press the ENTER button to confirm.
- The display will show the value.
- Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Light on time
With this function, users are able to display the running time of the led board.
Light on time selected:
- Press the ENTER button to confirm.
- The display will show the value in hours.
- Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Firmware Version
With this function, users are able to display the firmware version.
Firmware Version selected:
- Press the ENTER button to confirm.
- The display will show the value.
- Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Reset Function
In this menu, users are able to reset the zoom motors or setup the Wireless ID.
Press
Menu button 2 seconds if the display is locked, else one impulsion on the Menu button is necessary to access to
the first menu. The display will show “ DMX Setting ”.
Use the UP / DOWN button to select Reset Function . Press the ENTER button to confirm.
Use the UP / DOWN button to select Zoom Motor, Radio Clear Code.
Zoom Motor
With this function, users are able to reset the zoom motors .
Zoom Motor selected:
- Press the ENTER button to confirm.
- Use the UP / DOWN button to select Yes or No .
- Press the ENTER button to confirm.
- Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Radio Clear Code
With this function, users will associate EventX 100 to a Wireless Transceiver.
Radio Clear Code selected:
- Press the ENTER button to confirm.
- Use the UP / DOWN button to select Yes or No .
- Press the ENTER button to confirm.
-The display will show “ Press Up and Down key, Hold over 5s ”.
Do not press now. You must first press the Function button of the Wireless Transceiver
The green led named RF Link will flash.
-
Press Up and Down key, hold them over 5s.
- During the process the display will show “ Radio Code Clearing ……. ”.
- Once the display come back to the main menu, you can release Up and Down buttons.
Factory Settings
With this function, users can restore EventX 100 to factory default setting.
Press
Menu button 2 seconds if the display is locked, else one impulsion on the Menu button is necessary to access to
the main menu. The display will show “ DMX Setting ”.
Use the UP / DOWN button to select Factory Setting . Press the ENTER button to confirm.
Use the UP / DOWN button to select Yes or No .
Press the ENTER button to confirm.
Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
22
A