3-
y
Do not open the unit within five minutes after switching off.
y
The housing, the lenses must be replaced if they are visibly damaged.
Caution
There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself. In the unlikely event your unit may require service, please contact
your nearest dealer.
Installation
The unit should be mounted via its metal hole on the bracket. Always ensure that the unit
is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a 10 times
weight of the unit.
2. Technical Specification
y
3/6/6/9/12/15 channels switchable
y
Automatically switching between music trig and auto mode
y
Great built-in programs under Master/Slave mode trigged by music
y
Individual control of each LED cluster
y
Sound sensitivity adjustable via the menu
y
Auto-fading show with 3 different speeds
y
Specially designed stand for floor operation
y
LCD display for easy addressing and setting
y
Power Supply:
100~240V 50/60Hz
y
Fuse:
T 6.3A
y
Power consumption:
152W
y
LED:
3W Tri-color x 48pcs (Red:16pcs, Green: 16pcs, Blue:16pcs)
y
Dimension:
965 x 167 x 152 mm
y
Weight:
7.2kgs
16-
4.6 RC8ch Controller
Address setting
Each time you make a different
connection, you have to reset the
address. There are two ways that you
can set address for the LED lightings:
Manual address setting:
a. Set LED-RC8 to 4 Ch. (the address should be 1,2,
3 or 4) or 8 Ch. (the address should be1,2,3,4, 5,
6, 7, or 8) mode.
b. Connecting all LED lightings to the LED-RC8 and
power them on.
c. Hold the “black out” button for about 5 seconds
until the red indicator LED blinking.
d. The first LED lighting will be on.
e. Set address for the first lighting by pressing the
chase 1-8 buttons.
f. Press the “sound to chase” or “full on” button to
select other fixtures, and addressing for them.
g. Press the “black out” button for about 5 seconds to exit
address setting.
Automatic address setting:
a. Set LED-RC8 to 4 Ch. (the address should be 1, 2, 3 or 4) or 8 Ch. (the address
should be 1, 2, 3, 4, 5, 6, 7, or 8) mode.
b. Connecting all LED lightings to the LED-RC8 and power them on.
c. Hold the “black out” button for about 5 seconds until the red indicator LED blinking.
d. The first LED lighting will be on.
e. Press the “sound to chase” or “full on” button until all LED lightings on.
f. Press “random” button to set address automatically.
g. Press the “black out” button for about 5 seconds to exit address setting.
Button
address
Chase 1
1
Chase 2
2
Chase 3
3
Chase 4
4
Chase 5
5
Chase 6
6
Chase 7
7
Chase 8
8
Summary of Contents for CB-348TC
Page 7: ...13 6...
