SLAVE
On
Slave Mode
SOUND
Flashing
Sound activation
4.Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
5.Display:
To show the various menus and the selected functions.
6. MIC:
To receive music for sound active.
7.POWER OUT:
Connect the main power supply to the next unit.
8.DMX OUT:
For DMX512 link, use 3-pin XLR cable to link the next unit and output DMX signal.
3.2 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use the
DOWN
/
UP
button to change the mode. Once the required mode has been selected, press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button
again. Hold and press the
MENU
button about one second or wait for one minute to exit the menu
mode.
The main functions are showing below:
5A