ACME CB-16FC, User Manual, Page: 10 / 24

DMX State
Press the MENU button up to when the is shown on the display. Pressing ENTER button,
Use DOWN and UP button to select the (master slave), (blackout mode) or
(last state). Once the mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button again. Hold and press the MENU
button about one second or wait for one minute to exit the menu mode.
LED
Press the MENU button up to when the is shown on the display. Pressing ENTER button
and the display will blink. Use DOWN and UP button to select (On) or (Off),
Once the mode has been selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Hold and press the MENU button about one
second or wait for one minute to exit the menu mode.
Display Inversion
Press MENU button until is blinking on the display. Use the DOWN and UP button to
select (normal) or (inverse), Once the mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
White Balance
Press the MENU button to show on the display. Press the ENTER button and the display
will blink. Use the DOWN and UP button to select (Red), (Green) or
(Blue). And adjust the value from 125 to 255 , Once the mode has been selected, press
the ENTER button to setup, to go back to the functions without any change press the MENU
button again. Hold and press the MENU button about one second or wait for one minute to exit
the menu mode.
9A