
8C
Hints:
The Tap Sync button is used to set the speed by tapping the button several
times, the last two taps will define the speed with a maximum of 10 minutes.
Tap Sync will override any previous setting of the Speed slider unless the slider
is moved again.
4. Tap the Auto/Del button again to exit Auto mode .
4-5.3 Music Mode
1. Tap the Music/Bank Copy button to activate Music mode. The
Music LED lights indicating Music mode is active.
2. Use the Bank Up/Down button to select the bank that holds
the scenes you wish to run. The scenes you've selected will
chase in a sequential order according to the music rhythms
detected by the built-in microphone.
3. Tap the Music/Bank Copy button again to exit Music mode.
Page 25
3-2 Rear View
1. AUDIO IN
0.1V~1Vp-p.
2. MIDI IN
Receives MIDI data.
3. DMX Polarity Select
Used to select DMX polarity.
4. DMX Out
This connector sends your DMX value to the DMX
scanner or DMX pack.
5. DMX In
This connector accepts your DMX input signals.
6. Fog Machine Connector
This connector is used to plug in the Fog Machine.
7. DC Input
DC 9 -12V, 300mA min.
8. Power Switch
This switch turns On/Off the power.
Fog machine diagram
Page 6