13C
6. Tap the Scene button that corresponds to the scene you're
editing. This will overwrite the exited scene
NOTE:
Be sure to select the same scene in steps 3 and 6, otherwise you may accidentally
record over an exited scene.
4-2.2 Scanner Copy
This function allows you to copy the settings of one scanner to another.
1. Press and hold down the Scanner button you want to copy.
2. While holding the Scanner button, tap the Scanner button you
want to copy to.
Page 11
4-4.2 Reverse DMX channel
1. Program enable.
2. Press the Fine and Mode buttons the second time, the
Reverse LED lights up indicating Reverse mode is active.
3. Use Bank Up/Down button to change between the Pan and
Tilt, the corresponding LED lights indicating this selection.
4. Tap the Tap/Display button to change between 8 CH. and 16
CH. mode.
5. Tap the Scanner button to select the scanner.
Page 20