Instructions of Brushed ESC B1006
【
FEATURES
】
This ESC is set up in a simple way for easy operation. When switched on, it automatically searches the
neutral point. When the automatic setup is finished, the motor sends out “DO” “RE” “ME” music, indicating
it snatches the neutral point. It’s easy to operate.
【
SPECIFICATIONS
】
Input: 6V-8.4V DC
● BEC: 5V 1A
● Current Drain: 20A(forward), Max(spark): 300A; 150A(back, spark)
● Size: 35mm(L) * 33mm(W) * 30mm(H), Weight: 48.2g
● Applicable: 540/50T motor and above.
Wire diagram:
Setup:
Connect all wires according to the diaram, then switch on the radio.(Put to default setting for Programmable
radio.) Switch on the power of the ESC, and you’ll hear “DO, RE, MI” music. The music indicates that the
transmission is on, and the neutral point is set up. If the motor does not stop running a short while after the
neutral point is set, please switch off the ESC and then switch it on again to get the neutral point.
Functions: Warning:
Forward: push the throttle on the radio(for gun-type radio,
This ESC is not water-proof, Water
trigger the throttle), the car goes forward; should be avoided. If water goes
into it, take down the power switch,
Brake: put the throttle to REVERSE to brake the car; and use a blower to dry the ESC at
meduim temperature, then test it
Reverse: put the throttle to REVERSE when the car is not running, again.
the car will run backward. Backward speed can be proportion ally
controlled by adjusting the throttle. During backward running, when It’s dangerous to touch the motor
the throttle is pushed forward, the motor will run reversely. This will after running, as it emits heat during
brake the car temporally. running, and the cooling plate is hot
after running.
LED indicator is always on during forward, reverse and brake mode.
When the ESC is not working and the car stops, LED indicator is off;
When the radio is switched off, LED indicator on the ESC flashes.
-6-
●
