Technical Specifications
Measurement accuracy
Generally better than ±0.5°C
(from -10°C to +85°C)
Probe measurement range
-55C to +125C (-67F to +257F)
Sampling Frequency
Each channel is sampled once per second.
Memory capacity
PC dependent
Probe sensor
Dallas DS18B20 1-Wire Digital Thermometer
Resolution mode used
12 Bit, corresponds to 0.0625°C
Real-time clock accuracy
PC dependent
Logging resolution
1 second
Interface type
USB A to B
TempLog Software
Microsoft Windows based (XP or later)
Operating temperature of Logger
(not probes)
-15C to +40C
Weight
300 g
Case Dimensions
180 x 20 x 40 mm (7
” x 0.8” x 1.6”)
Specifications subject to change without notice.
Calibration
Each probe is individually calibrated during manufacture. TempLog software does also allow
the user to check the calibration of the probes. It is recommended that the same probes be
used in the same input channels each time the DS-108 is used.
Maintenance
Prior to each use of the product check the DS-108 casing for signs of damage (cracks,
broken or loose parts) or misuse. Check the leads for any signs of damage, ensure the outer
insulation later is not broken. If the unit is damaged in any way it should
NOT
be used and
should be returned to the supplier. The unit must not be used for any other purpose than for
that recommended by the manufacturer. The unit must not be submerged in any liquid.
Cleaning
Wipe the outside of the case with a clean cloth damped with IPA (Isopropyl Alcohol).
Warranty
All Acksen products carry a minimum 1 year back to base warranty covering manufacturing
defects and component failures. The device contains no user-serviceable parts
and as such
should only be repaired by skilled and authorised personnel. Failure to comply could result
in unsafe operation and should not be attempted under any circumstances. Contact below
for a list of approved service agents.
Note:
Any unauthorised repair or adjustment will automatically render the warranty invalid.
Repair and spare parts
Acksen Ltd.
28 Station Road
Whiteabbey
Newtownabbey
Co. Antrim BT37 0AW
United Kingdom
Or an approved repair company.
Returning a product for repair
If returning a product to the manufacturer for repair, it should be sent freight pre-paid to the
appropriate address. A copy of the Invoice and of the packing note should be sent simultaneously
by airmail to expedite clearance through Customs. A repair estimate showing freight return and
other charges will be submitted to the sender, if required, before work on the device commences.
WEEE
For EU customers Acksen Ltd offer a product take-back service. For customers within the
European Union (only) and products manufactured or sold by us; when those products reach the
end of their life, simply send them back to us at your expense, we will dispose of them according
to the relevant legislation. WEEE Reg. No. WEE/DD2117VU.
Part No: DS-108-UI-En.PDF
Web:
