Installation Instructions AUTOMATION COMPONENTS, INC
I0000658Rev 1 Page 2 of 4 2305 Pleasant View Road
Middleton, Wisconsin 53562
(888) 967-5224
www.workaci.com
Mounting of the sensor
The wall plate is screwed onto the wall (A) Put the top tabs of the front part into the top
The screw head diameter should be
max 7,5 mm
holes of the wall plate.
The screw head height should be
max 2,5 mm
(B) Press the lower edge of the case onto
the wall plate to latch
+~
The top part is pushed under the Terminals and jumpers on aSENSE
RL.
locking hooks of the wall plate The darker positions are default settings.
and is secured with a screw Terminals and jumpers are located under the top part.
If for some reason the PCB must be removed it must be handed carefully
and protected from electrostatic discharge! Normally, removing the PCB is
not required.
A
B
+~
(Unit without Relay)
