background image

Console

Program Operation

The console has 12 workout modes, P1-P11, plus a USER mode.

1. Press any button to turn on the console.
2. Use UP/DOWN buttons to select a desired program.
3. Press the MODE button to confirm the program you wish to use.
4. Programs 1-10: These programs allow you to adjust your desired settings. 
    

Example:

 If you wish to set a specific distance to your workout, press  

    the mode button until the Distance window is flashing, then use the UP/DOWN  
    buttons to set the desired distance.  Press MODE button to confirm.  
    Once all the desired parameters are set, press the START/STOP button to   
    begin your workout.
  

Program 11:

 This program allows you to set your target heart rate (THR). 

    

Example:

 During the setup mode for P11, the Pulse window will flash.  Use the  

    UP/DOWN buttons to set your desired THR. You will be asked to set an upper and   
    lower limit. Press the MODE button to confirm the values then press the START/STOP   
    button to begin.  During the workout, an alarm will sound if your heart rate   
    exceeds the upper limit. You must hold the pulse grips for this program to work. 
    See MONITORING YOUR HEART RATE section for more information.     

Program 12:

 This user program lets you establish which resistance levels you want   

                         at each time segment. 
     

Example:

 After you select user program, enter the desired workout settings as   

     you would for P1-P10. Once you set your workout settings, you will be able to   
     adjust the workout profile. Press the UP/DOWN buttons to adjust the first  
     resistance level segment. Press the MODE button to confirm. Continue this  
     process until all 10 resistance level segments have been set. Once complete,   
     press the START/STOP button to begin your workout.

Recovery Mode

This mode is used to determine your physical condition. This fitness test compares 
your pulse rate before and after training. You will notice that your fitness will improve 
with regular exercise.

Stop exercising, press RECOVERY button. The Time window will begin to count down 60 
seconds. Hold onto the pulse grips until the 60 seconds has expired. Your score will be 
displayed in a value ranging from 
displayed as F1 to F6, F1 being the best.

11

Summary of Contents for X380

















Reviews: