51
4. FRU (Field Replaceable Unit) List
This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of ACER B248Y Refer to this
chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
Please note that WHEN ORDERING FRU P ARTS, you should c heck the most up-to-date information available on
your regional web or channel. For whatever reasons a part number change is made, it will not be noted on the printed
Service Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your ACER office may have a DIFFERENT part
number code from those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided
by your regional ACER office to order FRU parts for repair and service of customer machines.
NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or regulations on
how to dispose it properly, or follow the rules set by your regional ACER office on how to return it.
Picture Description
TPV
Part No.
Part No.
MAIN BOARD
CBPCPGQC1Q1
NA
G-SYNC BOARD
317GAAMB326NVI
NA
LIGHT SENSOR
BOARD
LSPCPQA1 NA
OPTION BOARD
PTPCPQC3
NA
ADAPTER 19V
120W DELTA
380GLA19665DE0 NA
USB BOARD
USBPQC0
55.TK5M2.006
KEY BOARD
KEPCPQB4
NA
Summary of Contents for X25
