Acer X171 Dual, Service Manual

Page: 21 / 47

- 21 -
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT
SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A
VIDEO INPUT SIGNAL.
This monitor meets the Green monitor standards as set by the Video Electronics Standards
Association(VESA) and/or the United States Environmental Protection Agency (EPA) and The
Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical
energy by reducing power consumption when there is no video-input signal present. When there is
no video input signal this monitor, following a time-out period, will automatically switch to an OFF
mode. This reduces the monitor’s internal power supply consumption. After the video input signal is
restored, full power is restored and the display is automatically redrawn. The appearance is similar
to a “Screen Saver” feature except the display is completely off. The display is restored by pressing
a key on the keyboard, or clicking the mouse.
USING THE RIGHT POWER CORD
The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15
style and is UL listed and CSA labeled. The voltage rating for the power cord shall be 125 volt AC.
Supplied with units intended for connection to power outlet of personal computer: Please use a
cord set consisting of a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One
end terminates with a grounding type attachment plug, rated 10A, 250V,CEE-22 male configuration.
The other end terminates with a molded-on type connector body, rated 10A, 250V, having standard
CEE-22 female configuration.
Please note that power supply card needs to use VDE 0602, 0625, 0821 approval power cord in
European counties.