Veriton N2110G Service Guide
23
Removing the Memory Modules
1.
Turn the mainboard over to access the DIMM slots at the bottom of the mainboard.
2.
Press outward the holding clips on both sides of the DIMM slot to release the DIMM (
1
), then gently pull
the DIMM upward to remove it from the chassis (
2
).
3.
Repeat Step 2 to remove the remaining memory module.
Note:
A circuit board >10 cm
2
has been highlighted with the yellow rectangle as above
image shows. Please follow local regulations for disposal of detached circuit boards.
