![background image](http://html1.mh-extra.com/html/acer/veriton-m4618g/veriton-m4618g_service-manual_4693299026.webp)
18
Chapter 2
Advanced Chipset Configuration
Intel EIST
This item allows users to enable or disable the EIST (Enhanced Intel
SpeedStep technology).
Enabled
Disabled
Intel Turbo Boost
This item allows users to enable or disable the Intel Turbo Boost.
Enabled
Disabled
Intel AES-NI
Enables or disables Advanced Encryption Standard New Instructions
(AES-NI).
Enabled
Disabled
Intel XD Bit
When enabled, the processor disables code execution when a worm
attempts to insert a code in the buffer preventing damage and worm
propagation. When disabled, the processor forces the Execute Disable (XD)
Bit feature flag to always return to 0.
Enabled
Disabled
Intel VT
Enables or disables the Virtualization Technology (VT) availability. If
enabled, a virtual machine manager (VMM) can utilize the additional
hardware virtualization capabilities provided by this technology.
NOTE:
A full reset is required to change the setting.
Enabled
Disabled
Intel AMT
This item allows you to enable or disable the Intel Virtualizationa
Technology(IntelAMT) function.
Enabled
Disabled
Primary Video
Select a graphic controller as a primary boot device.
Auto
PCIE
Onboard VGA
Summary of Contents for Veriton M4618G
