28
Chapter 3
Pre-disassembly Procedure
Before proceeding with the disassembly procedure, perform the steps listed below:
1.
Turn off the system and all the peripherals connected to it.
2.
Unplug the power cord from the power outlets.
3.
Unplug the power cord from the system.
4.
Unplug all peripheral cables from the system.
5.
Place the system unit on a flat, stable surface.
Summary of Contents for Veriton M430
Page 1: ...Acer Veriton M438G M430G M430 Service Guide PRINTED IN TAIWAN ...
Page 12: ...Chapter 1 5 Block Diagram ...
Page 50: ...Chapter 3 43 4 Removing the two screws then take out the intrusion alarm assembly ...
Page 66: ...Chapter 5 59 M B Placement Jumper and Connector Information Chapter 5 ...