Chapter 3
31
Removing the Heat Sink Fan Assembly
WARNING:
The heat sink becomes very hot when the system is on. NEVER touch the heat sink with any metal
or with your hands.
1.
Disconnect the fan cable from the mainboard.
2.
Use a long-nosed screwdriver to loosen the four screws on the heat sink, in the order as shown below.
Summary of Contents for Veriton M430
Page 1: ...Acer Veriton M438G M430G M430 Service Guide PRINTED IN TAIWAN ...
Page 12: ...Chapter 1 5 Block Diagram ...
Page 50: ...Chapter 3 43 4 Removing the two screws then take out the intrusion alarm assembly ...
Page 66: ...Chapter 5 59 M B Placement Jumper and Connector Information Chapter 5 ...