Acer VERITON 7200 User Manual Download Page 4 | Manualshive

Page: 4 / 92

background image

iv

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numérique de la classe B respected toutes les exigences du
Règlement sur le matériel brouilleur du Canada.

Important safety instructions

Read these instructions carefully. Save these instructions for future
reference.

1.

Follow all warnings and instructions marked on the product.

2.

Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.

3.

Do not use this product near water.

4.

Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.

5.

Slots and openings in the cabinet and the back or bottom are
provided for ventilation; to ensure reliable operation of the
product and to protect it from overheating, these openings must
not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a radiator or
heat register, or in a built-in installation unless proper ventilation
is provided.

6.

This product should be operated from the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.

7.

Do not allow anything to rest on the power cord. Do not locate
this product where persons will walk on the cord.

VT7200-ug-e.book Page iv Monday, December 17, 2001 11:58 AM

«
...
2
3
4
5
6
...
»

Summary of Contents for VERITON 7200





























































































Reviews:

No comments

Related manuals for VERITON 7200

Brand: TechNexion Pages: 37

Brand: Festo Pages: 72

Brand: Baaske Medical Pages: 40

Brand: Vivo Pages: 3

VAIO PCV-RX480DS

Brand: Sony Pages: 1

Brand: Sony Pages: 2

VAIO PCV-RX470DS

Brand: Sony Pages: 1

Brand: Sony Pages: 3

Brand: Sony Pages: 45

Brand: Sony Pages: 57

Brand: Sony Pages: 61

Brand: Sony Pages: 50

Brand: Sony Pages: 40

Brand: Sony Pages: 57

Brand: Sony Pages: 88

Brand: Sony Pages: 62

Brand: Sony Pages: 64

Brand: Sony Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands