Acer Veriton 5500, Service Manual

Page: 96 / 173

Chapter 3 88
Removing the AGP VGA Card
1. See “Removing the Housing Cover” on page 86
2. Remove the screw on the bracket of the AGP card. Set the screw aside, you will need it when inserting
the AGP card.
3. Gently pull out the AGP card to remove it from the AGP slot
.
NOTE: There is no AGP slot for Veriton 5500.
NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGP
devices.
Removing the Modem Card
1. See “Removing the Housing Cover” on page 86
2. Remove the one screw as shown below and then remove the modem card from the PCI slot
.
NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGP.
Removing the USB/ Audio Board Module
1. See “Removing the Housing Cover” on page 86
2. See “Removing the Modem Card” on page 88
3. Disconnect the USB cable and the memory stick cable from the main board
.
4. Remove the two screws as shown here and then detach the USB/ Audio board