System Board
1-19
Table 1-5
System Error Messages (continued)
Message
Action
Memory Error at:
MMMM:SSSS:OOO
(W:XXXX, R:YYYY)
where:
M: MB, S: Segment,
O: Offset, X/Y: write/read
pattern
Check SIMMs on the system
board. Contact your dealer.
Memory Size Mismatch
CPU Clock Mismatch
Run Setup. Check if the values
shown in the memory
parameters are correct. If
correct, exit Setup and reboot
the system. If the error
message reappears, ask for
technical assistance.
Onboard Serial Port 1
Conflict
Run Setup and disable the
port.
Onboard Serial Port 2
Conflict
Run Setup and disable the
port.
Onboard Parallel Port Conflict
Run Setup and disable the
port.
Pointing Device Error
Check and connect pointing
device.
Pointing Device Interface
Error
Replace the pointing device or
contact your dealer.
Press
O
key to continue or
E
+
D
+
A
for Setup
Press
O
or
E
+
D
+
A
to enter
Setup.
Real Time Clock Error
Check the RTC chip. If it is still
good, run Setup. If not, replace
the RTC chip.
