13
ERROR
4
Command line contains a syntax
error, or LU97 is unable to
execute a command contained
in a command line. This code is
issued if a command does not
exist or if the parameter
supplied is outside the
permitted range. Under X0, X1,
X2, and X3, this result is used
instead of DELAYED and
BLACKLISTED.
CONNECT 1200
5
For X1, X2, X3, and X4, line
speed is 1200 bps, and LU97 has
been instructed to report the
line speed upon connecting.
NOT DIALTONE
6
For X2 and X4, LU97 has been
instructed to wait for a dial tone
during dialing, but none is
received.
BUSY
7
For X3 and X4, busy tone
detection is enforced, but a busy
signal is detected when
attempting to originate a call.
DELAYED
88
For X4 and X5, a call fails to
connect, and the number dialed
is considered “delayed” due to
country blacklisting
requirements.
CONNECT 2400
10
Line speed of 2400 bits/s.
CONNECT 4800
11
Line speed of 4800 bits/s.
CONNECT 9600
12
Line speed of 9600 bits/s.
CONNECT 7200
24
Line speed of 7200 bits/s.
CONNECT 12000
25
Line speed of 12000 bits/s.
CONNECT 14400
13
Line speed of 14400 bits/s.
Long-Form Code
Short-From Code
Description