![background image](http://html.mh-extra.com/html/acer/universal-usb-2-0-docking-station/universal-usb-2-0-docking-station_user-manual_6400017.webp)
14
Engl
ish
The LAN port (RJ-45) on the docking station does not work
after I plugged in the docking station.
This could be caused by following:
•
The docking station power adapter is not plugged in properly. Please
make sure the power adapter is plugged in properly to the power outlet
and the docking station.
•
The LAN cable is not correctly connected. Please ensure the LAN (RJ-
45) cable is plugged in properly.
•
The drivers are not correctly installed. Please install the driver from the
Driver CD and reboot your system before reconnecting your LAN
cable.
What graphics interface that USB docking station support?
The provided docking station driver includes a software-based graphics
driver. Not all hardware acceleration methods are available to applications.
The table below provides more support information.
* With Windows Aero enabled.
Interface
Windows XP
Windows Vista / Windows 7*
DirectX 10
No
Yes, if supported by the primary graphics card.
DirectX 9
No
Yes, but full screen mode is not available. It
displays only in window mode.
DirectX VA
No
Yes, if supported by the primary graphics card.
Direct 3D
No
Yes, but not available when the docking station
is set as the primary display.
DirectDraw
Yes
Yes
OpenGL
No
Yes, but full screen mode is not available. It
displays only in window mode.
GDI+
No
Yes, but full screen mode is not available. It
displays only in window mode.