manualshive.com logo in svg

Acer TravelMate 5344, User Manual, Page: 55 / 95

Share
Download
Acer TravelMate 5344 User Manual Download Page 55

Acer eRecovery Management -  55

were pre-installed on your system. If you can access important 
files on your hard drive, back them up now. 

If you can still run Windows, see 

"Recovering from within Windows" on 

page 55

.

If you cannot run Windows and your original hard drive is still working, 
see 

"Recovering from the hard drive during startup" on page 56

.

If you cannot run Windows and your original hard drive has been 
completely re-formatted or you have installed a replacement hard drive, 
see 

"Recovering from your recovery discs" on page 56

.

Recovering from within Windows

To reinstall Windows and all pre-installed software and drivers:

Click 

Start

    > 

All Programs

 > 

Acer

, then click 

Acer eRecovery 

Management

.

Click the 

Restore

 tab, then 

Restore Operating System to Factory 

Defaults

.

Click 

Yes

, then 

Start

. A dialog box will display information about the hard 

drive that the operating system will be recovered to.

Warning: Continuing the process will erase all files on your hard 
drive.

Click 

OK

. The recovery process begins by restarting your computer, then 

continues by copying files to your hard drive. This process may take a 
while, the Acer eRecovery Management screen displays the progress.

Summary of Contents for TravelMate 5344
































































































Reviews:

No comments