English
LR
6
044
1
&
86
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this device does cause harmful interference to radio
or television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain
compliance with EMC regulations.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements
and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and
RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for
the setting of ecodesign requirements for energy-related product.
External controls
1&2 Power button
Turns the monitor on/off. Blue indicates power on. Amber indicates
standby/ power saving mode.
3
4
5
6
7
MENU
OSD functions
Press this key to activate the OSD menu.
ULMB
Press this key to open the ULMB function and set it to your preferred setting.
Overdrive
Press this key to activate the Overdrive function and set it to either Normal
or Extreme mode.
Empowering
Press
the
Empowering
Key
to
open
the
Acer
eColor
Management
OSD and access the scenario modes.
Brightness
Press this key to open the Brightness control and set it to your preferred
level.
Power saving mode setup: Your system automatically switches to power saving mode
after 15 minutes in standby or sleep mode.
