11
E
nglish
Installation
Powering Off the Projector
1.
Press the “Power/Standby” button to turn off the projector
lamp.
2.
After pressing the “Power/Standby” button, you will see a
message “Power off the lamp?” on the on-screen display. Press
the “Power/Standby” button again to confirm. Other wise the
message will disappear after 5 seconds.
3.
“Power/Standby” indicator flashes red for about 2 minutes.
The projector will automatically shut itself down. If you want to
turn on the projector, you must press the “Power/
Standby”button within 2 minutes of the start of the indicator
flashing.
4.
Disconnect the power cord from the electrical outlet and the
projector.
5.
Do not turn on the projector immediately following a power off
procedure.
When the “TEMP” indicator flashes red for about 10 seconds,
you will see a message “Fan Fail” on the on-screen display.
After 5 seconds, the “Power/Standby” indicator flashes green
for about 2 minutes and the projector will automatically shut
itself down. Please contact your local reseller or service center.
When the “TEMP” indicator lights solid red for about 10
seconds, it indicates the projector has been overheated. You
will see a message “Over Temperature” on the on-screen
display. After 5 seconds, the “Power/Standby” indicator flashes
green for about 2 minutes and the projector will automatically
shut itself down. Please contact your local reseller or service
center.
When the “LAMP” indicator lights solid orange and “Power/
Standby” indicator flashes green for about 2 minutes. The
projector will automatically shut itself down. Please contact
your local reseller or service center.