30
E
nglish
Appendices
Changing the lamp
The projector will detect the lamp life itself. It will show you a
warning message “Lamp may fail soon ! Replacement Suggested !
” When you see this message, change the lamp as soon as
possible.
Make sure the projector has been cooled down for at least 30
minutes before changing the lamp.
Warning :
Lamp
compartment is hot!
Allow it to cool down
before changing lamp!
Lamp Changing Procedure:
1 .
Turn off the power to the projector by pressing the Power/
Standby button.
2 .
Allow the projector to cool down at least 30 minutes.
3 .
Disconnect the power cord.
4 .
Use screwdriver to remove the screw from the cover.Œ
5 .
Remove the cover.•
6 .
Remove the 2 screws from the lamp module.•
7 .
Pull out the lamp module.•
To replace the lamp module, reverse the previous steps.
Warning :
To
reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp bulb.
The bulb may shatter
and cause injury if it is
dropped.
1
2
3
4