background image

11

E

nglish

Powering Off the Projector

1.

Press the “Power” button to turn off the projector lamp.

2.

After pressing the “Power” button, you will see a message

“Power off the lamp?” on the on-screen display. Press the

“Power” button again to confirm.
Otherwise the message will disappear after 5 seconds.

3.

Power/Standby indicator flashes 

orange

 for about 40

seconds. The projector will  automatically shut itself down.
If you want to turn on the projector again, you must press the

“Power” button within 40 seconds of the flashing indicator.

4.

Disconnect the power cord from the electrical outlet and the

projector.

5.

Do not turn on the projector immediately following a power

off procedure.

Warning Indicator

™

When the Warning indicator turns 

red

, it indicates the projector has

overheated. The projector will automatically shut itself down.

™

When the Warning indicator flashes 

red (0.5 second intervals)

, it

indicates a problem with the lamp.  Turn off the projector and

disconnect the power cord from the electrical outlet, then contact

your local dealer or our service center.

™

When the Warning indicator flashes 

red (1 second intervals)

, it

indicates an internal problem.  Stop using the projector and

disconnect the power cord from the electrical outlet, then contact

your local dealer or our service center.

™

When the Warning indicator flashes 

orange

, it indicates high-speed

cooling in progress. This is not an abnormal condition, and you can

continue using the projector.

Installation

Summary of Contents for PD321

































Reviews: