7
4)
The value measured is shown on the digital display.
If the measurment value is >10A an acoustic signal is audible.
After working with 15A for 30 s, PASAR 323 needs a ”cool down
time” of 5 min.
4.4 Current Measurement AC/DC mA
Do not carry out current measurements in systems with more than
250V. Only measure currents up to 200mA.
1)
Select measurement range ”mAAC” or ”mADC” via
measurement function selection switch (4).
2)
Connect the black test lead to the COM socket and the red test
lead to the ”V
Ω
mA” socket
3)
Connect multimeter in series to the test object and then switch
on UUT.
4)
The value measured is shown on the digital display.
If the measurment value is >400mA an acoustic signal is audible.
4.5 Resistance Measurement
Prior to any resistance measurement it has to be ensured that the
resistor to be tested is not live. Failure to comply with this
prescription can lead to dangerous corporal user injuries or cause
instrument damage.
1)
Select measurement range (
Ω
) via measurement function
selection switch (4).
2)
Connect the black test lead to the COM socket and the red test
lead to the ”V
Ω
mA
” socket
3)
Connect test leads to UUT.
4)
The value measured is shown on the digital display.
4.6 Diode Test
Prior to any diode measurement it has to be ensured that the object
to be tested is not live.
1)
Select measurement range ( ) via measurement function
selection switch (4).
2)
Connect the black test lead to the COM socket and the red test
lead to the ” /V
Ω
mA
” socket
3)
Connect test leads to UUT.
