manualshive.com logo in svg

Acer P7270I Refresh, Service Manual, Page: 3 / 171

Share
Download
Acer P7270I Refresh Service Manual Download Page 3

 P7280/P7270I/P7280 Refresh/P7270I Refresh

Confidential

III

Preface

This manual is applied to P7280/P7270I/P7280 Refresh/P7270i Refresh projection system.  

The manual gives you a brief description of basic technical information to help in service 

and maintain the product.
Your customers will appreciate the quick response time when you immediately identify 

problems that occur with our products.  We expect your customers will appreciate the 

service that you offer them.
This manual is for technicians and people who have an electronic background.  Please 

send the product back to the distributor for repairing and do not attempt to do anything that 

is complex or is not mentioned in the troubleshooting.
 

Notice:The information found in this manual is subject to change without prior notice.  Any   
subsequent changes made to the data herein will be incorporated in future edition.

 
P7280/P7270I/P7280 Refresh/P7270i Refresh Service Manual 

 

 

Copyright Oct.2008
All Rights Reserved
Manual Version 3.0

Summary of Contents for P7270I Refresh












































































































































































Reviews:

No comments