manualshive.com logo in svg

Acer P7270I Refresh, Service Manual, Page: 103 / 171

Share
Download
Acer P7270I Refresh Service Manual Download Page 103

P7280/P7270I/P7280 Refresh/P7270I Refresh

Confidential

4-9

Procedure  

 

- Test equipment: DVD player 

 

 

- Test signal: CVBS 

Inspection item   

- Audio performance test

Inspection Distance  - 1.8M ~2.5M
Criteria 

 

- Check the sound from speakers.

 

 

- Check “Volume” is normal 

 

 

- Check “Mute” is normal

5. HDMI test

Procedure

    

- Test Signal : 720p,1080i 

 

 

- Test Pattern : Any Pattern   

 

 

                                   -  Equipment: DVD Player with HDMI output
                                   - Display type must be set to 16:9
Inspection item           - HDMI Test
Criteria                        - Ensure if the image is well performed and the   
                                     color can not discolor.
                                    - Check the sound from the speakers

4-8 Optical Performance Measure 

Inspection Condition
- Environment luminance: 5 Lux
- Product must be warmed up for 3 minutes
- Distances from the screen: 1.91 M
- Screen Size: 60 inches diagonal
- Reset to default before measurement

1.  Test equipment

Procedure  

 

- Test equipment: video generator. 

 

 

- Test signal: analog 1024x768@60Hz 

Summary of Contents for P7270I Refresh












































































































































































Reviews:

No comments