BIOS Utility
3-13
3.3.4
Operation of ECC
This parameter allows you to enable or disable the error correction
function. In the option
Correction Enabled
, ECC automatically
corrects any single-bit errors detected. For multiple-bit errors
detected, ECC only issues an NMI to signal the operating system of
the multiple-bit error detection.
In the option
Correction Disabled
, ECC detects both single-bit
and multiple-bit errors but does not correct either one. It only issues
an NMI to signal the operating system of the error detection.
This parameter is grayed if the ECC/Parity Mode Selection parameter
is set to either
Parity
or
Disabled
. Refer to section 3.3.3.
3.3.5
Memory at 15MB-16MB
To prevent memory address conflicts between the system and
expansion boards, reserve this memory range for the use of either the
system or an expansion board. Before setting this parameter, check
your add-on card manual to determine if your add-on card needs this
memory space. If not, set this parameter to
System Use
.
Summary of Contents for M9N System
Page 1: ...M9N System User s Guide ...
