61 Altos G330 Installation Configuration Guide
G330 Resource CD build 300(or later).
Software
Version
Directory on Resource CD
MegaRAID Storage
Manager
2.07-00 \app\g330\sas\8204ELP\Linux\
Configuring LSI MegaRAID SAS 8204ELP
Please refer to the Appendix D. for the LSI MegaRAID SAS 8204ELP
configuration.
Installation Tips
NOTE. The SuSE Linux Enterprise Server 9 Service Pack 3 CANNOT detect the
floppy correctly with LSI MegaRAID SAS 8204ELP installed. You need an USB
floppy during the installation to load the driver for MegaRAID SAS 8204ELP.
1.
Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize the
LSI MegaRAID 8204ELP, you need to make a driver diskette from the G330
Resource CD build 300 first before the installation.
2.
Please connect the USB floppy to the G330 before you start to install the
SUSE Linux Enterprise Server 9 Service Pack 3.
3.
Boot the system form SUSE Linux Enterprise Server 9 Service Pack3
bootable CD.
4.
When you see the boot menu on the screen, press F6, select Installation
then press Enter to continue.
5.
Follow the instruction to load the LSI MegaRAID SAS 8204ELP driver from
the driver diskette from the USB floppy.
6.
After loading the driver, select Back to return the installation procedure.
7.
Follow the instruction to change the CD to SUSE Linux Enterprise Server 9
CD #1.
8.
Continue to follow the instructions to the Installation Settings
9.
At the Installation settings, select the Software and click on Detailed
selection.
10.
Check C/C++ Compiler and Tools in the left window to add C/C++ compiler
tools.
11.
Select Various Linux Tools in the left window and check kernel-source in
the right window to add kernel-source.
12.
After you add the kernel-source and C/C++ Compiler and Tools, please
click on Accept and follow the instruction to complete the installation.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet Driver installation is the same as onboard LSI SATA RAID
enabled. Please refer to the SUSE Linux Enterprise Server 9 Service Pack 3 (with
