47 Altos G330 Installation Configuration Guide
8.
Follow the instructions to the Installation Settings.
9.
At the Installation settings, select the Software.
10.
Check C/C++ Compiler and Tools under Development to add C/C++
compiler tools.
11.
Click on Details, change Filter from Patterns to Package Groups.
12.
Select Source under Development in the left window and check kernel-
source in the right window to add kernel-source.
13.
After you add the kernel-source and C/C++ Compiler and Tools, please
click on Accept and follow the instruction to complete the installation.
14.
You will see the following message after CD#1 installation completed and
system rebooted. This is because during installation, the USB floppy
device was recognized as sda, and the mass storage was recognized as sdb.
After reboot, mass storage is now recognized as sda, but SuSE Linux still
tries to load system files from sdb. Please follow the step 14 and 15 below
to solve this.
resume device /dev/sdb1 not found (ignoring)
waiting for device /dev/sdb2 to appear.......................
.......not found -- exiting to /bin/sh
$
15.
At $ prompt, type the following command to mount file system on mass
storage:
$mount /dev/sda2 /tmp
Edit the grub menu list file to change all entries with sdb to sda:
$/tmp/bin/vi /tmp/boot/grub/menu.lst
Next, edit the fstab file to change all entries with sdb to sda and remove
lines with floppy:
/tmp/bin/vi /tmp/etc/fstab
16.
Please remove the driver diskette, press Crtl-Alt-Del to reboot the system,
and follow the instruction to complete the installation with remained
installation CDs.
NOTE: If the driver diskette is kept in the USB floppy drive, you would see
below message even though you’ve inserted the installation CD #2. In this case,
please press “Ctrl+Alt+F2” to switch to another terminal. Issue the
“reboot“ command to reboot the system. Then, remove the driver diskette and
continue the installation.
