manualshive.com logo in svg

Acer Extensa Series, User Manual

The Acer Extensa Series, an exceptional product line equipped with top-notch features, delivers superior performance and reliability. Enhancing your experience further, we have made the user manual easily accessible for free, allowing you to download it effortlessly from our website manualshive.com.

Share
Download
background image

External Monitor

4-

6

You can connect the computer to external monitors, many of which can display
resolutions higher than 640 x 480.
When the computer is connected to an external monitor, you can use the computer with
the cover closed.
You can also display images on the external and internal display at the same time.
This feature is called SimulSCAN™.  To enable this feature, set the 

DISPLAY

parameter in Setup to Both.  Setup is accessed via the Setup button on the system.
There is also a hotkey (Fn+F3) that lets you easily switch between LCD, CRT or Both.

Summary of Contents for Extensa Series

























































































Reviews:

No comments

Related manuals for Extensa Series

Brands by name

Popular brands

Load more brands