manualshive.com logo in svg

Acer Extensa Series, User Manual

The Acer Extensa Series, an exceptional product line equipped with top-notch features, delivers superior performance and reliability. Enhancing your experience further, we have made the user manual easily accessible for free, allowing you to download it effortlessly from our website manualshive.com.

Share
Download
background image

Using Indicator Lights

2-8

Front Indicator Lights

Standby
Mode
Indicator

Lights when the computer enters
standby mode.

Hard Disk
Indicator

Lights when the computer writes to or
reads from the hard disk.

Num Lock
Indicator

Lights when the embedded numeric
keypad is toggled on using the Num
Lock (Fn+Num Lk) key.  See 

Using the

Numeric Keypad

 later in this section

for further details.

Caps Lock
Indicator

Lights when the caps lock function is
toggled on using the Caps Lock key.

Scroll Lock
Indicator

Lights when the scroll lock function is
toggled on using the Scrl Lk key.

Standby Mode

Indicator

Hard Disk Indicator

Num Lock Indicator

Caps Lock Indicator

Scroll Lock Indicator

Summary of Contents for Extensa Series

























































































Reviews:

No comments

Related manuals for Extensa Series

Brands by name

Popular brands

Load more brands