Preparing Your Display for Use |
19
Preparing Your Display for Use
1. Install in the desired location.
2. Make connections.
(See “Connecting Devices to Your Display” on page 22)
3. Plug the supplied power cable into the display and a power source.
CAUTION
MOVING OR INSTALLING THE DISPLAY MUST BE DONE BY TWO OR MORE PEOPLE.
Failure to follow this caution may result in injury if the display falls.
CAUTION
Do not mount or operate the display upside down, face up or face down.
IMPORTANT
When setting the display down to install the wall mount, place it face down on a flat and stable
surface covered by a protective sheet or cloth and a table cushion. DO NOT place the display
on an uncovered surface.
NOTE
Please refer to the “Safety Information” on page 5 of this manual for proper selection of AC
power cord.
Summary of Contents for DT653
Page 1: ...Public Information Display User Manual DT653 ...
Page 2: ......
